Now Available Retail

After a very successful Kickstarter Campaign, I'm pleased to be able to release the Tower of Portals retail. It's available for secure purchase via my Ko-Fi Store.

See the Tower on Ko-Fi

Below you’ll find more images and a link to the YouTube video that gives a much fuller look at what’s inside this monstrous build.

Download and Try for free

Want to see how it prints before you commit? Here’s where you can download a free sample floor of The Tower of Portals and test the detail, modular fit, and print quality for yourself:

Try it out, see how it fits your printer setup and if you like what you see, you know where to find the full Tower.

 

Notes & disclaimer

Designed for 28 mm tabletop. All photos show parts printed on my own FDM printers using PLA (tested on three separate printers and three PLA brands; 0.4 mm nozzle, 0.2 mm layers, 3 walls, ~15% infill; no manual slicer supports). I’ve included the same part orientations I used. “Support-free” means you don’t need to add slicer supports; there is one small, modelled-in breakaway support that you remove after printing. Results may vary by printer, material, and settings, so treat my prints as guidance rather than a guarantee. Details may change during development.